Sticker Application Guide

Step 1

Make sure that you clean the area thoroughly with soap and water. Do not use window cleaner or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

Step 2

Prepare the sticker for application by firmly rubbing a credit card across the length of the sticker. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

Step 3

Peel the paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat the previous step.

Step 4

Place the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait a few minutes before moving to the next step.

Step 5

Slowly peel the backing paper off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat the previous step.